Oops! It appears that you have disabled your Javascript. In order for you to see this page as it is meant to appear, we ask that you please re-enable your Javascript!
.slider_post_title{ font-family: "Didact Gothic", Times, serif; font-style: italic; font-weight: bold; color: #EEE; text-align: left; font-size: 48px; }

My First Clock (Part 2 of ?)

Having completed an initial design and tested it with a little model, it is time to move on to real pieces of metal.  Well – not so fast – first, make a metal model of the escapement which wasn’t part of the cardboard model I made earlier.  This practice for us who aren’t used to working in metal and it is also a good practical test of the design.

First, I made a more precise drawing of the escapement.

This is called a square escapement - not all are like this but it is an easier place to start.

Here’s a page from my notebook.  This is called a square escapement – not all are like this but it is an easier place to start.

 

2014-12-04 04.29.18

Blank brass sheet 1.5 mm thick.

The brass squares are now rounded off.  The edge is marked blue to make it easier to see later.

The brass squares are now rounded off. The edge is marked blue to make it easier to see later.

Now it is time for hardware.  Start with three squares of brass.  After marking and putting a hole in the center, they are mounted in a mandrel (holder) and rounded in the lathe.

The cutter is shaped, hardened, and tempered.

The cutter is shaped to the tooth profile that I designed, then hardened and tempered.

In this picture the cutter is stopped after cutting the teeth so that you can see it in relative position.

In this picture the cutter is stopped after cutting the teeth so that you can see it in relative position.

Next I have to make a cutter so that I can cut teeth into the wheel.  Now I can put the wheel blanks into the cutting machine and start making teeth.

 

Here's the escape wheel on top of my design drawing - pretty!

Here’s the escape wheel on top of my design drawing – pretty!

I next marked and cut out the anchor in brass (because it is easier) so that I can test the escapement design.  Sorry I don’t have any pictures of that process.

Then, I mounted the wheel and the anchor onto plywood with two brass studs set at the right distance apart.  This allows me to test the interaction of the pallets (tips of the anchor) and the wheel.  In a real clock the pendulum is connected to the anchor and the tips of the teeth push the pallets which then pushes the pendulum to keep the clock going.  So, you can see that this is the heart of a clock – if the teeth do not push the pallets properly, the clock will not run.  To give you a sense of size, the wheel is 48 mm in diameter – that’s a little less than two inches for you Americans.

It works!  If I move the wheel slowly clockwise, the anchor will move back and forth; tic- tock.

It works! If I move the wheel slowly clockwise, the anchor will move back and forth; tic-tock.

Now I will make the real deal – a brass wheel and steel anchor.  After that it will be the plates and pillars.

Stay tuned,

 

3 comments

    • Sue on 19-Dec-2014 at 5:13 pm

    Great work, Mostyn. As you say, beautiful, and you explain / write so well. Thanks for taking the time (!!) to share with us. Much love to you both.

    • Mike Schmidt on 18-Dec-2014 at 8:26 pm

    Mostyn and Debbie,

    Your blogs are so well wriiten and very enjoyable.. Its really neat that we all get tp particpate in your great learning adventure.

    Thank You Both

    Mike Schmidt

    • Rosalyn Sample on 18-Dec-2014 at 2:22 pm

    So fascinating to see your work and all it takes to be able to know “what time it is”….and so impressed with the previous inventors (and you!) for coming up with the ideas, and the execution of such precise (and beautiful) workings! Thanks for sharing your great photos, too! All the best to you!!!

Comments have been disabled.